NOTE: Table above shows approximate performance for new pump with nitrile impeller pumping water.

• SELF-PRIMING: Pump will produce a suction lift approaching 10 feet (3m) when dry and a lift up to 22 feet (6.7m) when primed. Be sure suction lines are airtight or pump will not self-prime.
• RUNNING DRY: Unit depends on liquid pumped for lubrication. Do not run dry for more than 30 seconds. Lack of liquid will damage the impeller.
• PRESSURES: For continuous operation, pressure should not exceed 20 psi (1.4 kg/sq cm).
• TEMPERATURES: Nitrile impeller recommended for liquid temperatures of 50° to 180°F (10° to 82°C).

Features:
• Easy to service and maintain.
• Will tolerate abrasive wear (this may affect performance - seek advice from your distributer).
• Handles hard and soft solids without clogging.
• Non pulsating flow.

Applications:
Flow rate: up to 9.6 USgpm, maximum head 40ft (17.3psi)
Self-priming from dry up to 2.4m (7.8ft)